Tadiran Telecom SMVH09A-2A1B1NA, Руководство по обслуживанию

Страница: 14 / 68

11
Function and Control
ON/OFF button
Press this button can turn on or turn off the air conditioner.
MODE button
Press this button to select your required operation mode.
Auto Cool Dry Fan Heat
When selecting auto mode, air conditioner will operate automatically according to ex-factory setting. Set temperature can’t be
adjusted and will not be displayed as well. Press "FAN" button
can adjust fan speed. Press " " or " " button can adjust
fan blowing angle.
After selecting cool mode, air conditioner will operate under cool mode. Press "+" or "- " button to adjust set temperature. Press
"FAN" button to adjust fan speed. Press " " or " " button to adjust fan blowing angle.
When selecting dry mode, the air conditioner operates at fan1 under dry mode. Under dry mode, fan speed can’t be adjusted.
Press" " or " " button to adjust fan blowing angle.
When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. Press "FAN" button to adjust fan
speed. Press " " or " " button to adjust fan blowing
angle.
When selecting heating mode, the air conditioner operates under heat mode. Press "+" or " - "
button to adjust set temperature. Press "FAN" button to adjust fan speed. Press " " or " " button to adjust fan blowing
angle. (Cooling only unit won’t receive heating mode signal. If setting heat mode with remote controller, press ON/OFF button
can’t start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is
depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~31
℃
; Fan speed: auto, fan1, fan2 , fan3 , fan4, fan5, infinte speed.
When selecting " " with remote controller, it’s auto swing. Horizontal louver of air conditioner will swing up&down automatically
at the maximum angle.
When selecting " , , , , " with remote controller,it's the fixed position swing. Horizontal louver of air conditioner
will stop at that position as shown by the icon to swing.
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), fan1( ), fan2 ( ) , fan3 ( ) ,
fan4 ( ), fan5 ( ), infinite fan.
Note:
● Under AUTO speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
● Fan speed under dry mode is fan1.
● After entering the infinite fan speed mode, curses can adjust the fan speed according to the button"+" or"-".
AUTO
fan1 fan2 fan3
fan4 fan5
button
Press this button turn on or turn off up & down swing function.The remote controller defaults to static swing condition.
Press "MODE" button and " " button at the same time at remote controller OFF to switch between simple swing and static
swing.
In static swing condition, pressing button, the swing angle of up & down louver changes as below:
Note:
infinite fan
No display