Tadiran Telecom Coral IPx 500, Быстрое руководство по установке

Страница: 71 / 86

System Configuration
3-1
Sy
st
em Configur
ation Coral I
P
x
500
3
3
System Configuration
Coral IPx 500
33
This chapter describes the layout and configuration of the Coral IPx 500 system. For a
general description of the Coral IPx 500 cage, see
page 1-2, General System Description
and Installation
. For a more detailed description of the main and expansion cages, see
Chapter 2
.
The Coral IPx 500 can operate as a system in any one of the following configurations:
„
One main cage (one IPx 500M unit). See
Figure 3-1
.
„
One main cage and one expansion cage (one IPx 500M unit and one IPx 500X
unit). See
Figure 3-2
.
„
One main cage and two main expansion cages (one IPx 500M unit and two IPx
500X units). See
Figure 3-3
.
The main cage includes control cards and peripheral cards. The expansion cage or
cages include peripheral cards.
Features
„
E1, T1, PRI, and LAN via RJ-45 I/O interface connections on the top panel of the
cards
„
Simple input/output (I/O) cable routing from the rear panel
„
48 VDC or 115/230 VAC electrical power supply units in every cage
„
Supports all of the features, interfaces, and terminals of Coral FlexiCom products
„
Includes nine card slots in each main cage and 10 card slots in each expansion
cage.
Table 3-1
displays the number of slots per system configuration.
„
The motherboard of the main cage integrates the circuitry of the service cards,
eliminating the need for installing service cards within the system.
1 General Description