Tadiran Telecom Coral IPx 500, Быстрое руководство по установке

Страница: 12 / 86

1-2
Coral IPx 500 Installation Manual
General System De
script
ion and Installation
1
Cage Components
The Coral IPx 500 cage is designed to provide a simple, reliable method for installing
and removing the printed circuit cards and assemblies that contain the active circuitry
of the system. The Coral IPx 500 cage includes slots for control and peripheral cards, a
slot for the power supply unit, door locking studs, free space at the top of the cage
designed for cool air outflow and cable connection, holes on the side and top panels
for hot air outflow, I/O cable routing from the top section of the cage through the rear
panel, and a door release mechanism on the right side of the cabinet adjacent to the
door hinge.
Front View ( Figure 1-1 )
The front view of the cage displays the cage door. The cage door includes a ventilation
grille near the bottom for incoming cool air and at the top for warm exhaust air. The
door also includes locking studs on the left side of the door.
Left and Right Views ( Figure 1-1 )
The left and right views of the cage display the mounting bracket. The mounting
bracket is used to attach the cage to the rack. The cooling holes allow warm air to be
removed from the cage. The left panel of the cage includes an opening for routing the
Resources and Expansion cables.
Top View ( Figure 1-1 and Figure 1-19 )
The top view of the cage displays the decorative cover that protects the top section.
The top view (as seen from the rear side) displays the openings at the top of the rear
panel, through which the I/O cables rare routed to and from the top section of the
cage.
View of Top Section ( Figure 1-15 )
The top section includes the slots for all I/O connections (Champ TM
,
Amphenol

,
Microribbon

, and RJ-45), the AC power connection, and the cage ground connection
nut. The top section of the cage includes ten routing slots on the rear panel that enable
I/O connection cables to be routed to and from the top section. The top section also
includes the chassis grounding wire connection.
Internal Views ( Figure 1-4 , Figure 1-5 , Figure 1-6 , and Figure 1-7 )
The internal view of the assembled cage (
Figure 1-4
and
Figure 1-5
) displays the
internal view of the cage when it is operational. The power supply unit is installed in
the extreme left slot of the cage. The remaining cards displayed are either peripheral or
control cards. The internal view of the empty cage (
Figure 1-6 and Figure 1-7 ) displays
the relevant motherboard components including card connections and jumpers.