Tadiran Telecom Coral FlexiCom CoraliPx FlexSet-IP 280S, Руководство по установке

Страница: 64 / 98

56 Coral IPx and FlexiCom Registration Coral FlexSet-IP 280S Installation Manual
Coral FlexSet-IP 280S Installation Manua
l
6
Quality of Service ...........................................................(Route: IP,0,1)

DIFFSERV (Yes/No)
: This protocol is used to improve the Quality of Service
provided by routers. Set to either Yes or No according to requirements of the
system administrator. The DiffServe protocol values are defined for the entire
system.

802.1Q/P (Yes/No)
: This protocol defines whether to use 802.1Q/P ethernet
protocol used by Ethernet switches. Set to either Yes or No according to
requirements of the system administrator. The 802.1Q/P protocol values are
defined for the entire system.
Keyset/FlexSet Definitions..............................................(Route: EKT)

IP_FAX_ENABLED [Y/N]
: If this FlexSet-IP 280S is able to send or receive fax
calls, set this parameter to Yes (default: No ).

IP_MODEM_ENABLED [Y/N]
: If this FlexSet-IP 280S is able to send or receive
modem calls, set this parameter to Yes (default: No ).
Programming the Buttons...............................................(Route: PROG)
Each programmable button on each FlexSet-IP 280S may be assigned a specific
function, or series of functions.
................................................................................................................

Post-Registration Test Parameters
After completing registration, the registration status of the FlexSet-IP 280S phone can
be checked.
IP-Ports: Keysets ............................................................(Route: IP,1,0)

STATUS
: This parameters displays the registration status of IP keysets. If it is
set to ACTIVE , the registration of the phone was successful.