Tadiran Telecom Coral FlexiCom CoraliPx FlexSet-IP 280S, Руководство по установке

Страница: 19 / 98

Coral FlexSet-IP 280S Installation Manual Phone Installation and Configuration Procedure 11
Coral FlexSet-IP 280S Installation Manual
3
................................................................................................................

Registering the Phone in the Coral IPx / FlexiCom
Before configuring parameters on the phone itself, the phone must be defined in the
Coral IPx / FlexiCom Program Interface (PI).
Minimum Requirements

Coral Version 14.67 or higher
Verifying the Coral Registration Parameters for all Phones
1
Verify that the phone has been authorized to operate on this
Coral IPx/FlexiCom system. See
Feature Authorization (Route: FEAT, 1), page 50
.
If the phone has not been authorized to operate on this system, contact the
manufacturer’s representative.
2
Verify that an adequate number of ports and media channels have been defined
in the Coral IPx/FlexiCom system for the FlexSet-IP 280S. See
Size Definition
(Route: SIZ), page 50
.
3
Record the following parameters of the UGW card that will act as the gateway
of this phone. See
UGWC (Route: IP, 0, 1,1), page 51
.

Local IP address
(Signaling)

Global IP address
(Signaling)
Registering the FlexSet-IP 280S Phones
1
Define the MAC address of the phone before connecting it to the LAN.
See
Defining the MAC Address, page 51
.
The phone cannot be initialized without a registered MAC address. The MAC
address can be found written on a label on the bottom of the phone or on the
packaging box, or displayed on the graphic display of the phone.
2
Define parameters in the PI that apply for all keysets in the system, including
system features, station and keyset timers, idle display, and fixed system keys.
See
System-wide Defined Parameters for All Keysets, page 53
.
3
Assign the phone to groups as required. See
Possible Group Assignments,
page 53
.
4
For the individual phone, specify its port name. The port name is displayed on
other phones that are engaged in a conversation with this phone. See
Port List
(Route: PLIS,0), page 54
.