TCAC-RTSM-20150203 Tadiran Domestic Pool Type Technical Manual
1) Preparation before running the unit
When you run the unit for the first time, all the indicators on the wire controller will light for
3s, and then, display the fiducial web page. After no operation for 40s, all indicators will go
out automatically except
POOL TEMP
indicator lighting.
When the unit is running, if there is no operation or malfunction for 10s, the backlight of the
display will go out automatically. After 30s, all indicators will disappear except operation
MODE
and
POOL TEMP
.
2) Mode Selection
The unit is enhanced with three operation modes, Cool Mode, Heat Mode and Pump Mode.
Cool Mode:
The unit cools down swimming pool water by compressor drive according to
heat-pump principle. Used when the swimming temperature is high in summer.
Heat Mode:
The unit heats swimming pool water by compressor drive according to heat-
pump principle. Used when the ambient temperature is low.
Pump Mode:
The pump run for circling the water. Used when trial run or other necessary
situation.
By default, the unit operates Heat Mode. Change:
3) Temperature set
SET TEMP
indicator displays the setting water temperature.
Default is 28
℃
, the cool mode setting range is 10~30
℃
, the heat mode setting range is
20~35
℃
.
Method for set:
4) Power on/Power off