Tadano RCS-FC1, Руководство пользователя

Страница: 19 / 28

M038000E
Measures for Emergency Case
19
Measures for Emergency Case
Measures for Emergency Case
1. When Radio-control Operation is Impossible
The radio-control operation is electrically made with the radio-control system. Therefore, a
part or the whole of the radio-control operation becomes impossible when the radio-control
system has a problem.
If a problem of the radio-control operation is recognized, confirm the operation of the four
LEDs of the transmitter and the mode indicator lamp of the control unit.
(1) If the LED of the transmitter flashes
・
If the power of the transmitter is turned on
while the motion selection switch is
operated, indications (2) as shown in the
table are displayed.
If the power of the transmitter is turned on
while the speed control lever is operated,
indications (4) as shown in the table are
displayed.
If the power of the transmitter is turned on
while the motion selection switch and
speed control lever are operated,
indications (1) as shown in the table are
displayed.
In either case, once again turn the power
on.
・
If the power of the transmitter is turned on
while the push switch (the horn, engine
start and speed mode) is operated,
indications (3) as shown in the table are
displayed.
After confirming the switch, once again turn
the power on.
・
If the motion selection switch is kept under
the operation state approximately for five
minutes due to a failure, trapped dirt or the
like, indications (2) as shown in the table
are displayed. After confirming the switch,
once again turn the power on.
Depending on the failure conditions, changing to the manual operation may not
restore the normal operation.
Check the LED indications of the transmitter or the error number on the mode
indicator lamp of the control unit in order to take the correct measure for the error
number.
Warning
M22676E
：
Flashing red (with short cycle)
：
Flashing red (with long cycle)
： Flashing orange ： Flashing green
Mode indicator
lamp
【 Transmitter 】
【
Control unit
】
Engine start
LED
Speed mode LED
Emergency
stop LED
Power LED
Emergency
stop LED
I / R
Engine start
LED
Speed
mode LED
Power LED
Mode
indicator lamp
1
2
3
4
5
6
7
* I / R : Indication priority