Tadano RCS-FC1, Руководство пользователя

Страница: 18 / 28

M037990E
Battery Replacement for Transmitter
18
Battery Replacement for Transmitter
Battery Replacement for Transmitter
1. Battery Replacement Timing
Replace the batteries in the following cases.
(1) When the power LED of the transmitter
flashes.
(2) When the alarm (which has a “two-tone”
sound) sounds while the motion selection
switch is operated.
The power LED also flashes in this case.
2. How to Replace Batteries
[NOTE]
Inserting the batteries incorrectly for plus
(+) and minus (-) may cause a liquid spill,
ignition, heat generation, and burst.
Insert the batteries according to the
direction plate.
If the battery cover is loosely fixed, water
may enter inside and cause a problem.
Fasten the fixing screw securely.
1.
Open the batteries cover and remove the
old batteries.
2.
After replacing the new batteries, close the
battery cover and fasten the fixing screw.
Use four AA-size batteries.
Do not mix any old or different types.
M22675E
Two-tone Alarm
Power LED
(Flashing)
M22372E
Fixing screw
Battery cover
AA-size battery
Direction plate