Tactile Medical Flexitouch Plus, Руководство пользователя

Страница: 51 / 70

97 98
Customer Service Toll Free: 833.3TACTILE (833.382.2845)
FLEXITOUCH PLUS with ComfortEase
8.2 Applying Your Flexitouch Plus with ComfortEase
Head Garment
Preparing Your Head Garment for the First Time
1. Unfold your head garment, so the head strap is facing up and
located at the top. This is the front of the head garment. The nose
piece is located with the garment. The chin straps are located at
the bottom (Figure 8.2.a.).
Figure 8.2.a.
NOTE:
A mirror may be helpful for garment placement and fitting when
applying the head garment.
2. Place your head garment around the back of your head, aligning
the top of the garment so the forehead strap runs across the
crown of your head.
3. Pull the forehead strap through the plastic loop (Figure 8.2.b.).
Tighten the garment by pulling on the forehead strap, and secure
it by attaching the hook fastener of the forehead strap to the
inner head strap (#3 in Figure 8.2.c.).
4. Adjust the right inner chin strap to fit snugly under your chin
(Figure 8.2.d.).
5. Adjust the left outer chin strap over the top of the right inner
chin strap, and fasten using the hook fastener (Figure 8.2.e.).
6. Conform the nose piece across the bridge of your nose, and
attach the free hook fasteners to the side of your head garment
to ensure good contact with your cheeks. Adjust your garment
so it doesn’t come into contact with your eyes (Figure 8.2.f.).
Figure 8.2.b. Pull the Forehead Strap Through the Plastic Loop