19
CHAPTER 5
Conducting a Treatment Session
Once you have connected your garment to the controller unit and
applied the garment to your limb, you are ready for your treatment
session with the Entre Plus system . Start your treatment session using
the instructions below .
5.1
Selecting Your Pressure Setting
Follow the steps outlined below to select the settings prescribed by
your healthcare provider:
NOTE:
The controller unit will recall the pressure setting used during the
last treatment session. In most situations the pressure settings will not
need to be modified from one treatment to the next.
1. Turn the controller unit ON.
Turn on the controller unit by pressing the button located on
the front panel
(Figure 5.1.a.)
. The LCD screen will illuminate .
2. Select the pressure setting prescribed by your physician.
The button allows you to toggle between the three pressure
levels: low, medium and high . Select the prescribed pressure
setting listed on your Prescribed Treatment Card .
