Tactical Electronics UDC 360, Руководство пользователя

Страница: 10 / 16

• Tactical Electronics video systems are designed to operate interchangeably with each wireless monitor: Wrist Mounted
Monitor (WMM), Handheld Monitor (HHM), Monocular Micro Viewer (MMV), Heads-Up Display (HUD), Wrist Mounted
Monitor Pro (WMM Pro), or Handheld Monitor Pro (HHM Pro).
• Each monitor is programmed to receive a frequency transmitted directly from the purchased camera system. If multiple
camera systems are in use, the monitors are equipped to receive separate channel frequencies in order to view and
cycle between various Tactical Electronics camera systems.
» WMM Operation
The Wrist Mounted Monitor has a 3.5 inch LCD screen that
displays B/W or color video transmitted from the camera source.
The monitor contains an internal receiver, and when powered
“ON” automatically receives RF video signals from the chosen
camera. The WMM is completely wireless and cannot be hard-
wired.
»
Wrist Mounted Monitor (WMM)
The Wrist Mounted Monitor is powered by two 3V Lithium
batteries. The batteries are to be inserted positive (+) terminal
first.
The power switch for the Wrist Mounted Monitor (left) is the top
button near the battery cap. Press and hold the power button
for approximately 3 seconds to power “ON” the WMM. The
screen will display the current channel and battery power meter
when the unit is “ON”.
Always remove batteries when not in use.
IMPORTANT: If lines begin to appear across the screen, the
lines are most likely a sign of LOW BATTERIES.
» WMM Channel Selection
If multiple camera systems are in use, all monitors are equipped
to receive four separate channel frequencies. Use the channel
selector button in order to view and cycle between multiple
camera systems. When toggling, the current channel will be
displayed on screen.
To determine a camera’s channel frequency, simply cycle
through each of the four channels until a picture is displayed
on screen.
Tactical Electronics & Military Supply
OPERATION AND SUPPORT PUBLICATION
MONITOR OPTIONS
10
Power
Channel Selector