The method for making adjustments in this screen is the same as described above. In the WING TYPE menu, if the
FLAP selection is set to 2AI1FL and the TAIL selection is set to Delta, the elevator-to-aileron mixture will
automatically be fixed to 100%.
If the 1AI1FL wing type is selected the elevator can be mixed to the flaps. The mix can be active at all times, or
turned on/off with a selected switch.
If the 2AI wing type is selected, the elevator can be mixed to ailerons. Set the mix as needed. A control switch for
the mix can be selected if desired, or the mix can always be active by selecting a percentage but not selecting a
switch.
If the 2AI1FL wing type is selected the elevator can be mixed to the ailerons and/or flaps. The mix can always be
active by not selecting a control switch. Otherwise, select a control switch as explained earlier.
FLAP MIXER:
Not available for 1AI or
2AI wing types. Different setup
options are available depending on
the selected wing type, where the
flaps can be mixed to the aileron,
elevator, or back to the flaps.
FLAP MIXER
Tail type
Mixing
1 Ail
1 Ail, 1 Flap
2 Ail
2 Ail, 1 Flap
Flap > Ail
X
Flap
>
Ele
X X
Normal
Flap > Flap
X
Flap
>
Ail
Flap > Ele
X
Delta
Flap > Flap
X
1AI1FL: Highlight the FLAP
Æ
ELEV mix percent and adjust as desired. Press ENTER when finished. Assigning a
switch can allow on/off control of the mix. Set a mix percentage for each position of the switch (SP.0, SP.1, SP.2).
2AI1FL: If this wing type was set, the flap channel can be mixed with the aileron or elevator. Set the mix percent
for each channel to be mixed, for all switch positions that control the mix. Do NOT assign a switch at the CTRL
line to make the mix active at all times. Press ENTER when done.
AIR BRAKE SET:
This function is available at all
times when the model type is set to airplane.
When mixing brake to elevator the model's
elevator will deflect when the air brake is applied.
When mixing brake to flaps, the flaps will deflect downward when air brake is applied. When mixing brake to
aileron, the ailerons will deflect together when air brake is applied.
AIR BRAKE SET
1 Ail
1 Ail, 1 Flap
2 Ail
2 Ail, 1 Flap
Elev
X X X X
Ail
X X
Flap
X X
When the 1AI wing type is selected the brake can be mixed to the elevator channel. Adjust the mix percentage as
needed. Select a switch to turn the mix on/off.
When the 1AI1FL wing type is selected the brake can be mixed to elevator and/or flaps. Adjust each mix
percentage as needed. Select a switch to turn the mix on/off.
When the 2AI wing type is selected the brake can be mixed to elevator and/or aileron. Adjust each mix
percentage as needed. Select a switch to turn the mix on/off.
16
