Online Audio Solutions, LLC – www.tacotunes.com
ReCurve EZQ Overview
Line Out - Speaker Connections:
+ Right Front – Gray Wire (Passenger Side)
- Right Front – Gray / Black Wire (Passenger Side)
+ Left Front – White Wire (Driver Side)
- Left Front – White / Black Wire (Driver Side
+ Right Rear – Purple Wire (Passenger Side)
- Right Rear – Purple / Black Wire (Passenger Side)
+ Left Rear – Green Wire (Passenger Side)
- Left Rear – Green / Black Wire (Passenger Side)
Power Connections
Ground – Black Wire
12V+ - Yellow Wire
Remote In - Red
NOTE: All the wires ABOVE are included in the ReCurve EZQ wiring system. The blue wire
below is USUALLY included with an amp installation kit.
Remote Out (Amp) – Blue Wire – This wire will run to your aftermarket amp(s). Most amps
have a “remote” input. This signal will tell the amp to “turn on” when the ReCurve powers
up.
Line Out
Speaker Inputs
Power
Input / Output
