background image

2

• Switch the machine to the symbol “O” position to 

turn it off when making any adjustments in the 
needle area.

• Do not use a damaged or incorrect needle plate, as 

it could cause the needle to break.

7

This machine is not a toy:

• Your close attention is necessary when the machine 

is used by or near children.

• The plastic bag that this machine was supplied in 

should be kept out of the reach of children or 
disposed of. Never allow children to play with the 
bag due to the danger of suffocation.

• Do not use outdoors.

8

For a longer service life:

• When using and storing this machine, avoid direct 

sunlight and high humidity locations. Do not use or 
store the machine near a space heater, iron, halogen 
lamp, or other hot objects.

• Do not use cleansers or organic solvents, such as 

thinner, petroleum ether or alcohol, to clean the 
machine. Otherwise, the finish may peel off or 
become scratched.

• Always consult the Instruction and Reference Guide 

when replacing or installing any assemblies, the 
presser feet, needle or other parts to assure correct 
installation.

9

For repair or adjustment:

• If the light unit is damaged, it must be replaced by 

an authorized Baby Lock retailer.

• In the event a malfunction occurs or adjustment is 

required, first follow the troubleshooting table in the 
back of the Instruction and Reference Guide to 
inspect and adjust the machine yourself. If the 
problem persists, please consult your local 
authorized Baby Lock retailer.

Use this machine only for its intended use as described 
in the manual.

Use accessories recommended by the manufacturer as 
contained in this manual.

The contents of this manual and specifications of this 
product are subject to change without notice.

For additional product information and updates, visit 
our website at www.babylock.com

SAVE THESE 

INSTRUCTIONS

This machine is intended 

for household use.

FOR USERS IN COUNTRIES 
EXCEPT EUROPEAN COUNTRIES

This appliance is not intended for use 
by persons (including children) with 
reduced physical, sensory or mental 
capabilities, or lack of experience and 
knowledge, unless they have been 
given supervision or instruction 
concerning use of the appliance by a 
person responsible for their safety. 
Children should be supervised to 
ensure that they do not play with the 
appliance.

FOR USERS IN EUROPEAN 
COUNTRIES

This appliance can be used by children 
aged from 8 years and above and 
persons with reduced physical, sensory 
or mental capabilities or lack of 
experience and knowledge if they have 
been given supervision or instruction 
concerning use of the appliance in a 
safe way and understand the hazards 
involved. Children shall not play with 
the appliance. Cleaning and user 
maintenance shall not be made by 
children without supervision.

Содержание Baby Lock Flare





































































Отзывы: