background image

The iSeries-R is a microprocessor-based valve designed to regulate the supply water temperature to a heating system by modulating 

the position of an iSeries Mixing Valve. The iSeries-R operates the valve to provide outdoor reset to the heating system. A boiler sensor 

installed on the return line to the boiler is used to protect the boiler against flue gas condensation.

Outdoor Reset

In order to properly control a hot water heating system, the heat supplied to the build-

ing must equal the heat lost by the building. 

• The heat supplied to the building is directly proportional to the temperature of the 

water and the surface area of the heating element. The higher the temperature of the 

water flowing through the heating terminal, the higher the heat output. 

• The heat lost from a building is dependent on the outdoor temperature. As the out-

door temperature drops, the building heat loss increases.

These  two  facts  lead  to  the  concept  of  outdoor  reset  which  increases  the  supply 

water temperature as the outdoor temperature drops. Using this approach, the heat 

lost from the building is matched by the heat provided by the terminal units, therefore 
providing more comfort and energy savings.

Reset Ratio

The  Reset  Ratio  sets  the  relationship  between  outdoor  temperature  and  supply 

water temperature. It determines the amount the supply water temperature is raised 

for every 1 degree outdoor temperature drop. For example, if a Reset Ratio of 1.2 

is selected, the supply water temperature is increased by 1.2 degrees of every 1 
degree of outdoor temperature drop.

2-Way / 3-Way Mixing 

An iSeries Mixing Valve may be used to mix the hot boiler water temperature with the cooler return water temperature from the system 

loop. The position of the iSeries Mixing Valve is modulated in order to inject different rates of hot water into the cool system return water. 

This allows for virtually any water temperature to be supplied to the heating system. When deciding between a 2-way or 3-way valve,  

maximum flow rates must be considered. See the charts on page 2 before selecting style of valve / piping.

Most boilers cannot operate at low temperatures, therefore the iSeries-R can be modulated back in order to prevent the boiler from 

operating at cold temperatures, by installing the boiler return sensor.

102-145

Instruction Sheet

i Series - Outdoor Reset (iSeries-R)

2-Way and 3-Way i Series Mixing Valves

SUPERSEDES: New

EFFECTIVE: August 1, 2003

Pvuepps!bjs!!ufnqfsbuvsf

Tvqqmz!xbufs!ufnqfsbuvs

f

61

)21*

41

).2*

21

).23*

.21±G

).34*±D

221

)54*

81

)32*

81

)32*

:1

)43*

321

)::*

281

)88*

261

)76*

241

)65*

2:1

)99*

3/3

3/1

2/7

1/9

2/1

1/7

:1

)43*

61±G

)21*±D

2/3

1/3

1/5

2/5

2/9

Cpjmfs

Tfotps

Tvqqmz

Tfotps

3.xbz!Wbmwf

Pvuepps

Tfotps

jTfsjft.S

1

Cpjmfs

Tfotps

Tvqqmz

Tfotps

Pvuepps

Tfotps

4.xbz!Wbmwf

jT

fsjf

t.S

C

D

B

Plant ID# 001-1025

4.xbz!Wbmwf!xjui!Ijhi!Ufnqfsbuvsf![poft

Tvqqmz

Tfotps

jTfsjft.S

C

D

B

Cpjmfs

Tfotps

Pvuepps

Tfotps

C

D

B

4.xbz!Wbmwf!xjui!Mpx!Ufnqfsbuvsf![poft

Tvqqmz

Tfotps

jTfsjft.S

C

D

B

Cpjmfs

Tfotps

Pvuepps

Tfotps

C

D

B

®

Содержание i Series









Отзывы: