Taco Comfort Solutions 0026e Скачать руководство пользователя страница 5

Страница: 5 / 12

-5-

NEUTRAL

LINE

WIRING DIAGRAM

Removable

Green

Terminal

Plug

Terminal

Screws

GROUND

4. Wiring the circulator:

Disconnect AC power supply. Remove terminal box cover. Attach a wiring connector

into knockout hole. Use flexible conduit only. The green terminal plug may be removed to simplify wiring, then

snapped back in place. Connect Line/Hot power to the L terminal, Neutral to the N terminal and Ground to the

G terminal. See wiring diagram above. The 0026e is a double insulated circulator; grounding wire is not necessary but

recommended for safety. Replace terminal box cover. Insert rubber cap plug provided to cover unused knockout hole.

4a. Wiring the circulator for 0-10V DC Operation:

(See Page 9)

5. Start the circulator:

When purging the system, it is recommended to run the circulator at full speed long

enough to remove all remaining air from the bearing chamber. This is especially important when installing

the circulator in the off-season. Turn the dial to the HIGH setting for maximum fixed speed. A blue LED will

illuminate when the 0026e is powered on.

CAUTION: Never run the circulator dry or permanent damage may result.

ATTENTION: Ne laissez jamais le circulateur tourner à sec, des dommages permanents peuvent en résulter.

Full Speed Operation:

To run the pump at full speed during the fast fill, start-up and purge process, rotate dial to HIGH setting. The LED will

change to blue. To return to the normal operating mode, turn dial to desired activeADAPT, LOW, MEDIUM, HIGH or

0-10V setting.

Wiring Diagram

Содержание 0026e













Результаты поиска

Содержание 0026e

Отзывы:

Похожие инструкции для 0026e

Бренды по названию

Популярные бренды

Taco Comfort Solutions 0026e, Инструкция

Результаты поиска

Содержание 0026e

Отзывы:

Похожие инструкции для 0026e

Бренды по названию

Популярные бренды