Tacmina PW Series, Руководство по эксплуатации

Страница: 63 / 68

62
300
回
動作後 停止
[Pulse magnification mode
]
[Pulse frequency-division mode
]
Manual mode(strokes/min)
The settings are in the range from 1 to 999. The settings are in the range from 1/1 to 1/999.
The stroke number can be changed using the
and
keys.
Use
and
keys to adjust the
numerical value on the display to the measured discharge capacity.
Manual mode(mL/min)
[Calibration]
[Calibration execution]
Measure the discharge capacity using a metering device.
[Discharge capacity setting screen]
The discharge capacity can be changed using the
and
keys.
[Frequency-division setting screen]
The frequency division ratio can be changed using the
and
keys.
✽
No changes can be made while
the pump is operating.
[Magnification setting screen]
The magnification can be changed using the
and
keys.
✽
No changes can be made while
the pump is operating.
The stroke number can be changed using the
and
keys.
[Stroke number setting screen]
Parameter settings screen
✽
Refer to page 32.
Standb
y screen.
Pump
operation
Fully hold this do
wn.
The stroke number can be changed using the
and
keys.
Normally, set this to 300 spm.
PW series:
Standar
d (pulse) type setting flo
w
NO
TE
• When
the
po
wer
is
turned
on,
the
pre
viousl
y
estab
lished
mode and operation status are restored.
•
The
mode
can
be
c
hang
ed
onl
y
while
the
pump
is
stopped (when ST
OP is displa
yed).
•
If
no
operation
is
perf
ormed
f
or
3
seconds
on
the
settings
screen
f
or
the
maxim
um
disc
har
g
e
capacity
,
the
operation
is
canceled,
and
the
displa
y
returns
to
the
mode initial settings screen.
•
It
is
onl
y
in
the
man
ual
mode
that
settings
can
be
chang
ed e
ven while the pump is operating.
33-66(白)̲EM-127̲PW(E).indd 62 2014/11/17 11:56:46