Instructions for use
Before initial operation
Unpack the power tool and accessories
and check that no parts are missing or
damaged.
Attach the belt clip with the enclosed
fastening screw.
NOTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge
the batteries full
y. See “Charger/Charging
process”.
Tool change
CAUTION!
Before carrying out any work on the power
tool, move the direction pre-selector switch (7)
to the middle position.
Push adapter on square drive of impact
driver.
Insert tool in adapter.
Inserting/replacing the battery
Press the charged battery into the power
tool until it clicks into place.
To remove, press the release button
(STEP1) and pull out the battery (STEP2).
CAUTION!
Protect the battery contacts when the
battery is not being used. Loose metal parts
may short-circuit the contacts
–
Explosion and fire hazard!
5
