background image

2

GENERAL POWER TOOL           

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions,  illustrations  and  specifica-

tions provided with this power tool. 

Failure to 

follow all instructions listed below may result in 

electric  shock,  fire  and/or  serious  injury. 

Save all 

warnings and instructions for future reference. 

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. 

Cluttered or 

dark areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes.

• Keep children and bystanders away while oper-

ating a power tool. 

Distractions can cause you to 

lose control

.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

• Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. 

Water entering a power tool will increase the 

risk of electric shock.

• Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts. 

Damaged or entangled cords 

increase the risk of electric shock.

• When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

• If operating a power tool in a damp location is 

unavoidable,  use  a  ground  fault  circuit  inter-

rupter (GFCI) protected supply. 

Use of an GFCI 

reduces the risk of electric shock. 

PERSONAL SAFETY

• Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication. 

moment of inattention while operating power tools 

may result in serious personal injury.

• Use  personal  protective  equipment. Always 

wear eye protection. 

Protective equipment such 

as a dust mask, non-skid safety shoes, hard hat or 

hearing protection used for appropriate conditions 

will reduce personal injuries. 

• Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carry-

ing the tool. 

Carrying power tools with your finger 

on the switch or energizing power tools that have 

the switch on invites accidents.

• Remove  any  adjusting  key  or  wrench  before 

turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury.

• Do not overreach. Keep proper footing and bal-

ance at all times. 

This enables better control of the 

power tool in unexpected situations.  

• Dress properly. Do not wear loose clothing or 

jewelry. Keep your hair and clothing away from 

moving parts. 

Loose clothes, jewelry or long hair 

can be caught in moving parts.

• If devices are provided for the connection of 

dust extraction and collection facilities, ensure 

these are connected and properly used. 

Use of 

dust collection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use 

of tools allow you to become complacent and 

ignore tool safety principles. 

A careless action can 

cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct 

power tool for your application. 

The correct power 

tool will do the job better and safer at the rate for 

which it was designed.

• Do not use the power tool if the switch does not turn 

it on and off. 

Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from 

the power tool before making any adjustments, 

changing accessories, or storing power tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

• Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with 

the power tool or these instructions to operate 

the power tool. 

Power tools are dangerous in the 

hands of untrained users.  

• Maintain power tools and accessories. Check for 

misalignment or binding of moving parts, break-

age of parts and any other condition that may af-

fect the power tool’s operation. If damaged, have 

the power tool repaired before use. 

Many acci-

dents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, tak-

ing into account the working conditions and the 

work to be performed. 

Use of the power tool for 

operations different from those intended could result 

in a hazardous situation.

• Keep handles and grasping surfaces dry, clean 

and free from oil and grease. 

Slippery handles 

and grasping surfaces do not allow for safe handling 

and  control  of  the  tool  in  unexpected  situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the 

manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used 

with another battery pack.

• Use  power  tools  only  with  specifically  desig-

nated  battery  packs. 

Use of any other battery 

packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away 

from other metal objects, like paper clips, coins, 

keys, nails, screws or other small metal objects, 

that can make a connection from one terminal 

to another. 

Shorting the battery terminals together 

may cause burns or a fire. 

Отзывы: