41
4
Press [ENTER] on the screen displaying the current
settings.
●
This displays the current network settings.
5
Press [
↓
] to select the desired parameter and press
[ENTER].
●
This displays the screen to configure the selected parameter.
* Net mask refers to the subnet mask and gateway refers to
the default gateway.
* When configuring network settings manually, the default
values for the IP address and net mask appear on-screen.
This IP address is not valid. Enter an IP address applicable
to your network environment configuration.
6
Configure the value of the selected parameter.
●
[CHANGE]:
Changes the number highlighted by the cursor.
(0-9)
●
[
→
]:
Moves the cursor to the next digit or
parameter.
*
Note that if the entered IP address is invalid, the cursor will
not move to “SAVE” on the screen.
7
After you have entered all values, move the cursor to “SAVE”
and press [ENTER].
●
This changes the settings and returns to the network settings
screen.
●
Repeat steps 5 through 7 to configure other parameters as
necessary.