38
3
Press [
↓
] to select “NETWORK SETTING” and press
[ENTER].
●
This displays a screen of the current settings.
4
Press [ENTER] on the screen displaying the current
settings.
●
If your are configuring network settings for the first time, press
[ENTER] to acquire network settings (address information).
If all address information already appears on the screen, press
[BACK] to return to the network settings screen.
5
Press [
↓
] to select “AUTOMATIC (DHCP)” and press
[ENTER].
●
IP address and other information necessary for network
communication is configured automatically.
●
The acquired IP address and other settings information
appears on the screen.
6
Check the acquired settings.
●
Check the IP address and other information acquired
automatically from the DHCP.
●
The gateway and DNS information does not appear (was
not acquired) if there is a wiring issue between the remote
controller and the router or due to a communication failure.
Refer to the next page for more information.
●
Press [BACK] to return to the “NETWORK SETTING” screen.
This completes the procedure to perform automatic configuration of network settings.
Follow the procedure described in “4. Performing the communication test” (Page 42) to test the
connection.
Configuring the Connection to the Internet