7
DLS (DAYLIGHT SAVING)
To enable the dispenser to automatically adjust for daylight saving.
Press Button 1 repeatedly until ‘DLS’ is displayed.
Using Buttons 2 or 3 set at ‘01’ to enable Daylight Saving. Set at ‘00 ‘ to disable.
DATE
Press Button 1 repeatedly until ‘DATE’ is displayed. Wait a few seconds. YY will be displayed.
Using buttons 2 and 3: Set the Year (YY) then press 1
Using buttons 2 and 3: Set the Month (MM) then press 1
Using buttons 2 and 3: Set the Date (DD) then press 1
START (START DELAY FUNCTION)
After programming the doses and alarm times it is possible to delay the time at which the
dispenser will start to operate. This function is useful if the dispenser is being filled offsite, for
example, by a pharmacy and not being delivered to the user until a later date.
Press Button 1 repeatedly until ‘START’ is displayed.
Wait a few seconds. YY will displayed.
Using buttons 2 and 3: Set the Year (YY) then press 1
Using buttons 2 and 3: Set the Month (MM) then press 1
Using buttons 2 and 3: Set the Date (DD) then press 1
Using buttons 2 and 3: Set the Hour (HH) then press 1.
The time (HH) should be in advance of the first dose to be dispensed for the user.
If this function is not required do not set.
Note: If at any time you go back to check the START setting at a later time the display will show
the pre
-
set DATE settings. The START setting will not be displayed and it should be re
-
set.
RECORD
The dispenser will record the actual times the previous 28 medicines were dispensed.
Press Button 1 repeatedly until ‘RECORD’ is displayed. The time that the last medicine was
taken is displayed. Press Buttons 2 or 3 for all of the times medicine was dispensed over the
previous medicine cycle to be shown.
TEST FUNCTION
The dispenser has an inbuilt test function. To test the rotation and alarm sounds:
Press Button 1 repeatedly until ‘TEST’ is displayed.
Press Button 3 – the tray will rotate, ‘MOVING’ and then ‘TAKE’ is displayed.
The alarm will sound. Tilt the dispenser to stop the alarm. ‘TEST’ is then displayed again.
To test the
‘BEFORE’
function, Press Button 1 until ‘TEST’ is displayed. Press Button 2.
Close the lid and then turn the dispenser upside down twice. Turn back to the upright
position. The tray will rotate and the alarm will sound. Tilt the dispenser again to cancel.
Hold Button 1 down to return to clock.