inverter and battery system.
Try turn on the single module, without any cable connected. If still buzzer rings.
Then switch off the module and contact your local distributor.
7.
After switch On, the module turns on directly
l) BMS failure.
Solution:
Switch off the module and contact your local distributor.
Excluding the points above, if the faulty still cannot be located, turn off battery
and contact your local distributor.
7. Emergency Situations
1.
Leaking Batteries
If the battery pack leaks electrolyte, avoid contact with the leaking liquid or gas.
If one is exposed to the leaked substance, immediately perform the actions de-
scribed below.
a) Inhalation: Evacuate the contaminated area and seek medical attention.
b) Contact with eyes: Rinse eyes with flowing water for 15 minutes and seek med
-
ical attention.
c) Contact with skin: Wash the affected area thoroughly with soap and water and
seek medical attention.
Ingestion: Induce vomiting and seek medical attention.
2.
Fire
NO WATER! Only dry powder fire or carbon dioxide extinguisher can be used; if pos
-
sible, move the battery pack to a safe area before it catches fire.
3.
Wet Batteries
If the battery pack is wet or submerged in water, do not let people access it, and
then contact TAB or an authorized dealer for technical support. Cut off all power
switch on inverter side.
4.
Damaged Batteries
Damaged batteries are dangerous and must be handled with the utmost care. They
are not fit for use and may pose a danger to people or property. If the battery pack
seems to be damaged, pack it in its original container, and then return it to TAB or
an authorized dealer.
30
R4824_Operating_Manual_17.05.2021.indd 30
R4824_Operating_Manual_17.05.2021.indd 30
17.5.2021 14:16:02
17.5.2021 14:16:02