background image

 

EU Declaration of Conformity

 

Document number/date: 

TA17025 / 02/02/2017 

Manufacturer: 

Technische Alternative RT GmbH 

Address: 

A-3872 Amaliendorf, Langestrasse 124 

The manufacturer bears sole responsibility for issuing this Declaration of Conformity.  

Product designation: 

UDV 

Brand names: 

Technische Alternative GmbH. 

Product description: 

3-way valve with drive unit 

The item described above complies with the following directives: 

2014/35/EU 

Low Voltage Directive 

2014/30/EU 

Electromagnetic compatibility 

2011/65/EU 

RoHS directive on restricting the use of certain hazardous substances 

2014/68/EU 

Pressure Equipment Directive 

The following harmonised standards have been applied: 

EN 60730-1:2011 

Automatic electrical controls for domestic and similar applications 

–  

Part 1: General requirements 

EN 60730-2-14:1997 + 
A1:2001 + A11:2005 + 
A2:2008 

Automatic electrical controllers for domestic and similar applications 

– 

Part 2-14: Particular requirements for electric actuators 

EN 61000-6-3: 2007 
                +A1: 2011 
                + AC2012 

Electromagnetic compatibility (EMC) 

– Part 6-3: Generic standards – 

Emission standard for residential, commercial and light-industrial 
environments 

EN 61000-6-2: 2005 
                + AC2005 

Electromagnetic compatibility (EMC) 

– Part 6-2: 

Generic standards 

– Noise immunity for industrial environments 

EN 50581: 2012 

Technical documentation for the assessment of electrical and electronic  
products with respect to the restriction of hazardous substances 

Attachment of CE label: 

On packaging, operating instructions and type plate 

 

 
 
 

Issued by: 

Technische Alternative RT GmbH 
A-3872 Amaliendorf, Langestrasse 124 

Authorised signature

 

 

 

Dipl.-Ing. Andreas Schneider, Managing Director  
02/02/2017 
 
This declaration certifies conformity with the listed directives, but does not guarantee any properties. 

The safety instructions in the product documents supplied must be observed. 

 

 

 

Содержание UDV

















Отзывы: