TA D-LOGG, Руководство пользователя

Страница: 6 / 32

6
USB driver
The USB driver is required for USB communication between the PC and D-LOGG and it cre-
ates a virtual COM port on the PC for this purpose.
The driver must be installed on the PC for this (see
" Installation " ) and is automatically load-
ed when a D-LOGG is connected to the PC.
The required drivers can be installed from the homepage
http://www.ta.co.at or also via Win-
dows Update.
Installation
When a D-LOGG is connected to the PC with a USB cable, the PC automatically recognises
a new hardware component and automatically starts the "Hardware-Assistant" (Hardware
Wizard) if a driver has not yet been installed for this device.
If an Internet connection is available, Windows connects automatically to the Windows Up-
date website to install a suitable driver. In this case no further steps are necessary.
If an Internet connection is not available, or no suitable driver has been found or if Windows
is configured to prevent the automatic installation of drivers, the required drivers can be man-
ually installed.
If the Wizard does not start automatically, the installation can also be manually started. When
the device is connected to the PC but the driver has not been installed, it is displayed in the
Windows
device Manager) with an exclamation mark in one of the < other devices >, <P orts
(COM and LPT) > or < USB Controller > lists. The driver installation can be manually started
from here.
For more detailed information please see the USB-drivers manual under http://www.ta.co.at .