TA D-LOGG, Руководство пользователя

Страница: 15 / 32

Winsol
15
Recording of measured values from a customer system
There are three options for recording the measured values from a customer system:
a)
The data logger is installed by the system and regularly read out locally by the service
technician using a notebook.
b)
If the customer himself records the measured values from his system, then he can
forward the log files to the technician
by email .
c)
If the reading out of the recorded data is not possible locally , the measured values
can be recorded as follows:
Preparation for data recording:
1) Connect the data logger to the PC, without a DL cable and with the slide switch in
the "USB" position.
2) In Winsol create a customer for the data to be recorded and select.
3) Specify the desired configuration in setup and overwrite at the data logger.
4) Move the slide switch to the "DL" position.
Data acquisition at the customer:
5) Connect the data logger to the controller (observe polarity!). With a UVR1611, data
output via the DL-bus must be activated (output 14 defined as "data link").
6) As long as the data logger is connected to the controller, the measured values are
recorded according to the selected save criterion.
7) When disconnecting the data logger from the controller, date and time must be not-
ed, because Winsol needs these so that when reading data in, the correct time can
be allocated to it. This is not necessary with the UVR1611, UVR61-3, UVR63 and
UVR63H.
Reading out of the recorded data:
8) Connect the data logger to the PC, without a DL cable and with the slide switch in
the "USB" position.
9) Select the corresponding customer in Winsol .
10) The data stored in the data logger can now be read in with " Read out logger data "
and then analysed.
11)
Read out logger data
Reading out of the logger data is started in the menu " Logger \ Read out data ".
The data recorded and stored in the Bootloader are read out and saved as a log file in the
Winsol file system on the PC. A log file is produced for each month in the corresponding
sub-directory ("...\log"). When data logging from two or more data records (devices) Winsol
saves its data in the sub-
directories "…\log1" and "…\log2" etc.. The file name of a log file
contains information about the year and month of the contained data. For example, the file
"
Y 2012 10 .log" contains the measuring data saved in October 2012 .
Warning: If the data of several systems are recorded, then before the data is read in, it must
be ensured that the correct " Customer " (see Customer mode ) is selected!