T4W PIK XRP, Руководство по эксплуатации

Страница: 4 / 10

4
Please read the operating instructions carefully before using the device, and
keep them in a safe place.
Cause
• Foreign substances between fluid nozzle and fluid needle prevent sealing.
• Self tensioning needle sealing damaged or lost.
• Horn air holes or air circuit clogged.
•
Dirt on fluid needle tip or air outlet.
• Too little material in cup, fluid nozzle not tight, needle
sealing damaged, nozzle set dirty or damaged.
• Atomization air flows through the paint channel to the cup.
The paint nozzle is not tigh enough. Air nozzle is not completely screwed,
the air net clogged and the seat is defective or nozzle insert is damaged.
Repair
• Clean fluid needle and fluid nozzle in thinner or use new fluid nozzle.
• Replace needle sealing.
• Soak in thinner, after wards clean with nozzle-cleaning needle.
• Turn air nozzle by 180 degrees. If defective pattern
remains, clean paint outlet in air nozzle.
• Refill material, tighten parts, if necessary clean or replace.
• Tighten parts accordingly, clean or replace.
Trouble
• Gun leaks from fluid nozzle.
• Paint emerges from fluid needle-needle sealing.
• Spray pattern in sickle shape.
• Drop-like or oval shaped pattern.
•
Paint spray flutters.
• Material hubbies or “boils” in paint cup.