T4W PIK XRP, Руководство по эксплуатации

Страница: 6 / 10

6
accordance with the stated principles of personal protective
equipment, fire and environmental protection. Failure to follow
manufacturer’s coating materials, can lead to serious injury.
• To determine compatibility with the applicable coating materials, a list of
materials used in the construction of the tool will be available on request.
• When working with compressed air throughout the system collects
energy. Use caution when working and rest periods to avoid the danger
that may result from the stored energy of compressed air.
• Always use an electrostatic discharge hoses.
•
Never block the outlet nozzle holes with your fingers.
• Do not modify the equipment on their own. Find out whether all the parts
are in working order, and replace if worn only new and original.
• In the event of an accident disconnect the unit from the power source.
Follow the general principles of health and safety in the workplace.
Never direct the coating material to a heat source or fire, it could cause
a fire.
Instructions for use
Flow control.
The stream can also be adjusted using the air cap die.
A) You gain by turning the air cap so
that the ends are on the sides of the
gun.
B) You gain by turning the air cap
so that the ends are aligned with the
trigger.