T3 TWIRL CERAMIC 77581, Руководство пользователя

Страница: 6 / 21

10 11
ENGLISH ENGLISH
HOW TO USE YOUR
T3 TWIRL CERAMIC
TM
OPERATING INSTRUCTIONS
T3 TWIRL CERAMIC
TM
Power &
Temperature
Button
1
2
3
4
Press the Power & Temperature
Switch to turn the iron on. Lights
will cascade up, then turn solid
when the unit is ready to use.
To change the temperature*,
double click the Power &
Temperature Switch until
the lights flash. Then continue
to click to cycle through the
temperature settings.
Release the Power & Temperature
Switch after reaching your
desired temperature. The
selected temperature light(s)
will flash, and all lights will
cascade up or down to your
selected temperature. Wait
for the lights to turn solid
before using the iron.
To turn off the iron, press and
hold the Power & Temperature
Switch until the lights turn off.
*See Temperature Guide on page 9 for recommended settings.
1
2
3
4
5
Start with dry, detangled hair. Twist
the top part of your hair out of the
way and secure it with a sectioning
clip. Gather the rest of your hair into
another clip, leaving a 1-2” section out
to begin styling.
Lightly clamp one section of hair and
glide the iron toward the ends. Close
the clamp fully, then twist the iron up
toward the root.
While rolling, make sure the hair is
evenly wrapped around the barrel and
does not overlap.
Repeat this for the remaining sections
of hair. For a loose wavy curl, tug
slightly on the curled section before
allowing it to cool.
Hold the iron for a few seconds or until
the heat has fully penetrated the hair
section. Then carefully open the clamp
to release the curl.