SERVICE MANUAL
T3MOTION PROPRIETARY INFORMATION
Use or disclosure of data contained on this sheet is
subject to the restriction on the cover or title page of this
document.
Document No
040-00068
Revision
1
Sheet
6
4.0
Remove the two small Phillips head screws holding the red/pink board in place.
4.1
Gently lower the hinged panel. Do not force, if it does not open all the way
easily, carefully guide the wires to allow for some slack in them.
4.2
If you cannot get enough slack in the wires, check to see if clipping a nylon wire
tie is necessary. Not all units need to have this done.
