T Scale bw series, Руководство по эксплуатации

Страница: 4 / 6

BW/BWS/VW/CW/NTW/NSW weighing indicator operation manual REV: C1, March 2015 BW/BWS/VW/CW/NTW/NSW weighing indicator operation manual
1. INTRODUCTION
The BW/BWS/VW/CW/NTW/NSW series of weighing indicator
provides an accurate, fast and versatile series of general purpose
weighing scale with check-weighing functions.
All units include automatic zero tracking, audible alarm for pre-set
weights, and an accumulation facility that allows the individual weights
to be stored and recalled as an accumulated total.
2. KEY DESCRIPTIONS
ON/ OFF or
Turn on or off the power.
Zero or
Set the zero point for all subsequent weighing. Display shows zero.
A secondary function of "Enter" key when setting parameters or
other functions.
Tare or
Tares the scale. Stores the current weight in memory as a tare
value, subtracts the tare value from the weight and shows the results.
A secondary function incrementing the active digit when setting a
value for parameters or other functions.
Press Zero and Tare key together in normal weighing mode will
turn on/off animal scale function.(when enter/escape animal scale mode,
you will hear beeper on twice)
MR or
Memory recall key, show total accumulate weight in memory.
In setting mode, this key used to move active digits right.
Hold MR key to enter parts counting mode.
-1-
7. ANIMAL SCALES
Let the animal on the platform, after some second, if reading data
change not a lot, reading data will be locked.
In reading data lock mode, if you add/remove big weight, display
will still update and lock new reading data.
You can through the parameter to enter/escape animal weighing
mode.
8. KEYBOARD LOCK
You can use keyboard lock when this function enable (see detail
setting process in technical manual), after keyboard haven
’t use for 10
minutes, keyboard will be lock, after enter lock status, if you press any
key, display will show
“ K-LCK ”.
If you want to escape lock mode and return work mode, hold
PRINT , MR , ZERO key 2 seconds, display will show
“ ULCK ”, return
normal mode.
9. BATTERY OPERATION
The weighing indicator can be operated from the battery if desired.
The battery life is approximately 70 hours.
When the battery needs charging a symbol on the weight display
will turn on. The battery should be charged when the symbol is on. The
scale will still operate for about 1 hours after which it will automatically
switch off to protect the battery.
To charge the battery simply plug into the mains power. The scale
does not need to be turned on.
The battery should be charged for 12 hours for full capacity.
Just under the display is an LED to indicate the status of battery
charging. When the scale is plugged into the mains power the internal
-6-