T-Mobile tm-g5240 - T-mobile Hotspot Wireless Скачать руководство пользователя | Manualshive

Страница: 95 / 95

background image

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

92

Trademarks:

D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.

Copyright Statement:

No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by
the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2005 by
D-Link Corporation/D-Link Systems, Inc. All rights reserved.

CE Mark Warning:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures

:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

For detailed warranty information applicable to products purchased outside the United States, please contact the
corresponding local D-Link office.

«
...
93
94
95

Содержание tm-g5240 - T-mobile Hotspot Wireless
































































































Отзывы:

Нет отзывов

Похожие инструкции для tm-g5240 - T-mobile Hotspot Wireless

Monitouch V9 Series

Бренд: Hakko Electronics Страницы: 16

Бренд: Zonet Страницы: 2

Бренд: Zonet Страницы: 3

Бренд: Zenitel Страницы: 29

SOUNDFLOW i17 +

Бренд: WEEPLUG Страницы: 22

Harman Endurance Peak 3

Бренд: JBL Страницы: 17

Harman Reflect Aero TWS

Бренд: JBL Страницы: 21

Бренд: Hisense Страницы: 5

media access tg233

Бренд: Technicolor Страницы: 6

CradlePoint PHS300tw

Бренд: Cradlepoint Страницы: 2

Бренд: CTC Union Страницы: 66

Бренд: EnGenius Страницы: 3

Бренд: LG Innotek Страницы: 12

Бренд: Roxcore Страницы: 7

Бренд: Draytek Страницы: 207

Бренд: Vertex Wireless Страницы: 38

AirVelocity 1500

Бренд: Airspan Страницы: 36

Бренд: Ebyte Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды