background image

processing steps are as follows:
a) Check whether the two indicator lights are flashing or long on. If they 
are not on, please check whether the terminal and the car interface are 
plugged in.
b) The GSM indicator light does not keep on. At this time, please check 
whether the SIM card is correctly installed. If there is no problem with the 
installation, please replace it with another SIM card.
12.1.2 Please check the offline area

it’s individual drops or all drops ,in 

order to judge if the network problem of operators.

12.2 

When GPS signal reception is abnormal, please drive to a relatively 

open  place  to  locate.  Generally,  the  first  positioning  time  takes  1-2 
minutes. 
If it  is  not  positioned  for  a  long  time,  please  check  whether  there  are 
metal obstructions around the installation location of the terminal, which 
may affect the signal.

12.3

When GSM signal receiving abnormal, please check if the SIM card 

installed correctly or the GSM signals may not reach your location (such 
as the basement), please drive to the open sky.

1w.4 

The red LED is not glow when power on. Check the fuse of the power line. 

If the fuse is fused, please change the fuse with the seller, and check the device 
about the inner malfunction, then power on to use again.

13.GPRS Tips

        SIM  card  GPRS  data  suggested  a  monthly  subscription  service 
using  GPRS

If  the  vehicle  moving  for  a  long  time  every  day,  please 

change the upload interval longer, for example: TIMER,30# 

14. After sales service

1.

If products has technical changes,

we’ve no prior notice.

2.

The shape and color, please in kind prevail.

3.

Warranty card applies to the specified IMEI number in the following 

table.

4.

Please properly keep this card and receipt in case of    after-sales 

service.

5.

The following is for the warranty reference.

NAME

TELEPHONE
NUMBER

ADDRESS
TYPE

IMEI

Содержание T2-1














Отзывы: