T.L. FAHRINGER FW-200 HPA, Руководство пользователя

Страница: 24 / 26

FW-200 HPA, Rev. 4 3-3
REMOVING CLAMP BLOCKS, LOWER JAWS & GUIDE MOUNT RAILS
REMOVING THE CLAMP BLOCKS
1) Retract the clamps all the way up in order to line up the holes in the clamps with their respective screws.
2) Remove the spring retainer screw (3/16 allen screw). (See Diagram)
3) Remove the upper & lower clamp block mount screws (3/16” allen screws). (See Diagram)
4) Leave the allen wrench inserted into one of the mount screws to keep the slide from falling out when removing the block.
5) Using a flat blade screwdriver, pry the clamp block pushrod down until there is about a 1/32” gap between the clamp block
and the carriage.
6) Pull the clamp block straight out.
REMOVING THE LOWER JAWS
•
Remove the two lower jaw mount screws to remove the jaws. (See Diagram)
REMOVING THE GUIDE MOUNT RAILS
•
Remove the two guide rail mount screws. (See Diagram)
•
The inner guide mount may need to be removed if it is in the way of the guide rail mount screws.