T.I.P. HWA 3000 INOX, Руководство по эксплуатации

Страница: 13 / 152

2
The device is not suited for use in swimming pools.
The automatic booster sets from T.I.P. were developed for private use, i.e. not for industrial purposes or for
uninterrupted recirculation operation.
The pump is not suited to discharge saltwater, faeces, inflammable, etching, explosive or
other hazardous liquids. Please observe the max. and min. temperatures of the liquids to be
discharged stated in the technical data.
3. Technical Data
Model HWA 3000 INOX HWA 4500 INOX
Mains voltage / frequency 230 V ~ 50 Hz 230 V ~ 50 Hz
Nominal performance 550 Watt 1,200 Watt
Protection type IP X4 IP 44
Suction port 30.93 mm
(1 “)
, female 30.93 mm
(1 “), female
Pressure port 33.25 mm
(1 “)
, male 33.25 mm
(1 “), male
Max. flow rate (Q
max
)
1)
2,800 l/h
4,350 l/h
Max. pressure 4.2 bar 5.0 bar
Max. delivery height (H
max
)
1)
42 m
50 m
Max. suction height 9 m 9 m
Max. size of the solids being pumped 3 mm 3 mm
Max. permissible operating pressure 6 bar 6 bar
Min. ambient temperature 5 °C 5 °C
Max. ambient temperature 40 °C 40 °C
Min. fluid temperature 2 °C 2 °C
Max. fluid temperature (T
max
) 35 °C 35 °C
Max. cut-in frequency in one hour 40, evenly distributed 40, evenly distributed
Length of connection cable 1.5 m 1.5 m
Cable type H07RN-F H07RN-F
Weight (net) ~ 6.7 kg ~ 10.0 kg
Guaranteed sound power level (L
WA
)
2)
80 dB 86 dB
Measured sound power level (L
WA
)
2)
77,4 dB 84.1 dB
Sound pressure level (L
pA
)
2)
69,4 dB 78.5 dB
Dimensions (L x D x H) 35.5 x 18 x 42 cm 37 x 21 x 55 cm
Item no. 31142 31193
1)
2)
The values were determined with free, unreduced in- an outlet.
Noise emission values obtained according to the EN 12639 regulation. Measurement method according to
EN ISO 3744.
4. Scope of delivery
The scope of the delivery of this product includes:
One pump with a connection cord, one electronic pump control system, one operating manual.
Please verify that the scope of delivery is complete. Depending on the purpose of the application, additional
accessories may be necessary (please refer to the chapters titled "Installation" and “How to order spare parts“).
If possible, keep the packing until the warranty period has expired. Please dispose of the packing materials in an
environmental-friendly manner.
5. Assembly of the automatic booster set
Please observe also at the illustration given in Fig. 1 which is found as an attachment at the end of the present
operating instructions. It contains the numerical and other details which are set between brackets in the
specification below.
The automatic booster set consists of a self-priming electrical pump (17) and an electronic pump control system
(18) which can be assembled within seconds through a simple threaded connection.
10