T-Fal NutriCook, Руководство пользователя

Страница: 26 / 56

26
•
Ensure the appliance is unplugged and completely cooled down before cleaning and maintenance.
•
It is strongly advised to clean the appliance after each use as directed below.
•
The bowl, the inner lid, the cups and the spatula are dishwasher safe .
Bowl, steam basket, soaking basket and inner lid
•
Remove the bowl from the appliance. Clean the bowl, steam basket, soaking basket and inner lid with warm
water, washing up liquid and a sponge.
•
Scouring powders and metal scourers are not recommended.
•
If food has stuck to the inside of the cooking bowl, you may put water in the bowl to soak the food residue
before washing.
•
Dry the bowl carefully
Taking care of the bowl
For the bowl, carefully follow the instructions below:
•
Do not cut food in the cooking bowl.
•
Make sure you put the bowl back into the appliance after use.
•
Use the spoon provided or a wooden spoon and not a metal utensils to avoid damaging the bowl surface
•
To avoid any risk of corrosion, do not pour vinegar into the bowl.
•
The colour of the bowl surface may change after using for the first time or after multiple uses. This change
in colour is due to the action of steam and water and does not have any effect on the use of the appliance,
nor is it dangerous for your health, it is perfectly safe to continue using it.
Cleaning the micro pressure valve
•
When cleaning the micro-pressure valve, remove it from the lid –and open it by rotating
in the direction “open” (see diagrams page 11). After cleaning it, wipe it dry and place it back within the lid
Cleaning and care of the other parts of the appliance
•
Clean the outside of the appliance, the inside of the lid and the cord with a damp cloth and wipe dry.
•
Do not use abrasive products.
•
Do not use water to clean the interior of the appliance body as it could damage the heat sensor.
•
Remove the inner lid after each use to avoid the smell of strong foods lingering in the appliance. Clean in
warm water and washing up liquid.
CLEANING AND MAINTENANCE
choosen these parameters and before you start your cooking the light flashes.
Then, press the button the cooking time flickers on the screen. For the automatic cooking program, it is
the default cooking that appears on the screen. Set the desired preset time by pressing and buttons.
This setting time is including the cooking time.