T-Fal IS55 Series, Инструкция по эксплуатации

Страница: 13 / 38

6. Pour 1 liter water into the hose connector to rinse
the unit.
7. Close the boiler rinsing cap, reassemble the unit
and put the steam head on the hook.
8. Fill the tank with fresh water and let the steamer
produce steam until the tank is empty.
• In addition to the descaling procedure, we also
recommend rinsing the appliance after 50 hours of
use or 50 sessions. To carry out a rinsing operation,
follow these steps:
1. Ensure the appliance has cooled down.
2. Fill the water tank to the maximum level and put
it back on the base.
3. Shake the appliance gently.
4. Open the drain valve -
fig.20
to let the water go
out.
5. Make sure the water tank is empty and there is
no more water into the appliance.
6. Close the boiler rinsing cap.
Tips
• We recommend checking the garment care label for
manufacturer recommendations before steaming.
We also recommend testing the garment on an
unobstructed area such as an inner seam.
• Read the recommendations for the maintenance of
the fabrics on the labels of the clothing to be steamed.
• Test the strength of the colour of the fabric on an area
of the garment that is not visible (inside of a hem).
• Avoid contact between the steam head and silk or
velvet.
• Some garments are more easily steamed on the
reverse side.
• If you are using the steam head at a position close
to the ground, raise the hose frequently in order to
avoid the formation of condensation.
You may hear a gurgling noise if the hose is
obstructed in any way.
• Heavy fabrics may need to be steamed longer.
• Be careful at all times.
EN
7
9100017370 IS5510 Q0-X0_110x154 26/06/14 16:17 Page7