9
EN
30 sec
PREPARING A BEVERAGE
XL
XL
XL
XL
STOP
XL
XL
XL
1
4
7
2
5
8
3
6
9
10 sec
300 ml
ON
Switch machine on. While machine is heat
-
ing up, power button starts blinking red. After
approx. 30 seconds, power button light turns
steady green and machine is ready.
Use the lever to illuminate the bars in accord
-
ance with the number of bars shown on cap
-
sule, or set the bar display to your own taste.
Choose XL beverage for extra large cup.
Take cup from drip tray. Open the locking
handle.
Adjust drip tray position according to the
chosen beverage (see page 6-7). Place cup on
drip tray.
Move the lever to the right for hot beverages
and to the left for cold beverages. Beverage
preparation starts. Bar display lights vanish
progressively. Machine stops preparation auto
-
matically. Extraction can be stopped manually
by moving the lever back to the middle position.
Pull out capsule holder and remove used cap
-
sule. Put used capsule in capsule bin.
Open locking handle and pull out capsule
holder. Insert capsule in capsule holder and
insert it back in machine. Close locking handle.
After finishing preparation, bar display flashes
and power button blinks red for about 10 seconds.
During that time do not open the locking
handle!
Rinse both sides of the capsule holder with
water and dry. Insert capsule holder into ma
-
chine. Enjoy your beverage!
1
2
3
1
2
3