For your safety
• This appliance complies with the technical rules and standards for safety currently in force
(Electromagnetic Compatibility, Low Voltage, Environnement).
• This appliance is not designed to be used by children or other persons unassisted or unsupervised
if their physical, sensory or mental capacities prevent them from using the appliance in complete
safety. Children should be supervised to ensure that they do not play with the appliance.
• Warning ! The voltage of your electrical outlet must correspond to that of the iron (120V).
Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate
the guarantee
• If the electrical cord becomes damaged, it must be immediately replaced by an Approved
Service Center to avoid any danger.
• The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or has
functional anomalies. Never dismantle your appliance: have it inspected by an Approved
Service Center to avoid any danger.
• Always unplug your appliance: before filling or rinsing the reservoir, before cleaning it and after
each use.
• Never leave the appliance unattended when it is connected to a power source; if it has not
cooled down for approximately 1 hour.
2
IMPORTANT SAFEGUARDS
Read all instructions before using the iron.
When using your flat iron, basic safety precautions should always be followed, including the following:
1
1.
1
Use iron only for its intended use.
1
2.
1
To protect against a risk of electric shock, do not immerse the iron or the base of the iron
in water or other liquids.
1
3.
1
The iron should always be turned OFF before plugging or unplugging from outlet. Never yank
cord to disconnect from outlet ; instead, grasp plug and pull to disconnect.
1
4.
1
Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop
cord loosely around iron when storing.
1
5.
1
Always disconnect iron from electrical outlet when filling with water or emptying
and when not in use.
1
6.
1
Do not operate iron with a damaged cord or if the iron has been dropped or damaged.
To avoid the risk of electric shock, do not disassemble the iron. Contact our Consumer Service
Department for examination, repair or adjustment. Incorrect reassembly can cause a risk of
electric shock when the iron is used.
1
7.
1
Close supervision is necessary for any appliance being used by or near children.
Do not leave iron unattended while connected or on an ironing board.
1
8.
1
Burns can occur from touching hot metal parts, hot water or steam. Use caution when you
turn a steam iron upside down - there may be hot water in the reservoir.
1
9.
1
This appliance is only for domestic and personal use.
SPECIAL INSTRUCTIONS
1
1.
1
To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.
1
2.
1
If an extension cord is absolutely necessary, a 13 ampere cord should be used. Cords rated for
less amperage may overheat. Care should be taken to arrange the cord so that it cannot be
pulled or tripped over.
SAVE THESE INSTRUCTIONS
1800112936 FV3056U0:1800112936 FV3056U0 21/05/08 10:54 Page 2
