T-Fal 1549, Руководство пользователя

Страница: 7 / 20

ENG
5- TROUBLESHOOTING
Problems Possible Causes Solutions
• Water drips from the holes
in the sole plate.
• Brown streaks come through
the holes in the sole plate
and stain the fabrics.
• The sole plate is dirty or
brown and and is staining
the fabric.
• There is little or no steam.
• The sole plate is scratched
or damaged.
• The chosen temperature does
not allow for the formation of
steam.
• You are using steam while the
iron is not hot enough.
• You are using the burst of steam
button too often.
• The steam flow is too high.
• You have stored the iron
horizontally, without emptying it
and without setting it to DRY.
• You are using chemical descaling
agents.
• You are using pure distilled
water.
• Fabric fibers have accumulated in
the holes of the soleplate and
are burning.
• You are using too high a
temperature.
• Your fabric is not rinsed
sufficiently or you are using
starch.
• The water reservoir is empty.
•The anti-scale valve is dirty.
• Your iron has a build-up of scale.
• You iron has been used dry for
too long.
• You have placed your iron flat on
a metallic rest-plate.
• Set the thermostat in the
coloured zone (from
●●
to
MAX).
• Wait until the indicator light goes
out.
• Wait a few seconds between each
use of the button.
• Reduce the steam flow.
• See the section "Storing your
iron".
• Do not add any descaling agents
to the water in the water
reservoir.
• Do a self-cleaning and use tap
water.
• Do a self-cleaning.
• Clean the soleplate with a non-
metallic sponge.
Vacuum the holes of the sole plate
from time to time.
• Clean the soleplate as indicated
above. See the temperature table
to correctly set the thermostat.
• Clean the soleplate as indicated
above. Always spray starch onto
the reverse side of the fabric to
be ironed.
• Fill it with tap water.
• Clean the anti-scale valve.
• Clean the anti-scale valve and
do a self-cleaning.
• Do a self-cleaning.
• Always set your iron on its heel.
For all other problems or queries, please contact
our Consumer Service Department or an approved Service Centre
Phone number available on International Guarantee Card