T+A PA 2500 R, Руководство пользователя

Страница: 36 / 70

36
Front panel controls
All the important functions of the
PA 2500 R can be controlled using the buttons and rotary knob on the front panel.
Direct-acting buttons are provided for fundamental functions such as source selection. Functions which are needed less
frequently are controlled using menus which are called up by pressing the

/

button.
All information pertaining to the machine’s status is displayed on the integral screen. The following explains in greater
detail the functions of the front panel buttons and the meaning of the on-screen information.

On / Off switch
 

A brief press on the

button switches the unit on and off. When the
machine is switched on, the button glows.
 
In
Comfort Standby mode the

button of the PA 2500 R glows dimly to
indicate its state of readiness. In Eco Standby mode the

button is not
lit. (see chapter
‘Basic settings of the PA 2500 R'
)


Caution!
The mains button is not an isolation switch. Certain parts of the machine remain
connected to mains voltage even when the screen is switched off and dark. If you
know you will not be using the machine for a long period, we recommend that you
disconnect it from the mains by withdrawing the mains plug from the wall socket.

Source selection
To select one of the signal sources as the listening source, push the
corresponding button briefly.

It is possible to assign individual names to the listening sources.
(see Chapter
'Basic settings of the PA 2500 R' )

In comfort standby mode, the amplifier can be switched on by pushing a source
button briefly. At the same time this action selects the associated source device
for listening.
(see Chapter
'Basic settings of the PA 2500 R' )