38
Remote control
Introduction
In general terms the function of the buttons on the remote control handset is the
same as the corresponding buttons on the machine’s front panel.
The following table shows the remote control buttons and their function when
operating the machine.
Switches the device on and off
Switches the preamplifier output of the
P 3100 HV
on and off.
Switches the speaker outputs of a connected
power amplifier
on and off.
Direct source select buttons
…
The listening sources can be selected directly using the SOURCE
buttons
to
. The
button has a dual
function. Press the button twice to select listening source 6.
Increase / decrease
volume
The volume can be increased / decreased in steps by tipping
one of the volume buttons. The current volume level is displayed
on the display screen. If one of the buttons is kept pressed for
approx.. 2 seconds the volume increases / decreases
continuously until the button is released.
Starts playback (
Play
function)
During playback: halts (
Pause
) or resumes playback.
(Only for connected
source devices.)
Halts playback
(Only for connected
source devices.)
Navigation
Returns to the previous point / change button
Confirms the input / change button
Selects the previous point within a list / select button
Selects the next point within a list / select button
Confirmation button during input procedures
Alpha-numeric input
abc
...
wxyz
Special characters are assigned to the
and
buttons.
During the text input process it is possible to switch between
numerical and alpha-numeric input, and between capital and
lower-case letters, using the
button.
Opens the source menu of a connected
device.
Brief press:
Opens the tone control settings menu
Long press:
Opens the configuration menu
(for detail see chapter entitled '
Opens the configuration menu of a connected
device.
Function button for connected
source devices.
Function button for connected
source devices.
During character input:
Switches between numeric and alpha-numeric input, and
between capitals and lower case when pressed (repeatedly)
Function button for connected
source devices.
