T+A MP 2000 R Mk II, Руководство пользователя

Страница: 55 / 74

55
The Configuration for a WLAN connection
Setting the parameters for a
wireless network

Check that there is no cable connected to the LAN socket of the
MP 3100 HV .

Connect one of the WLAN aerials from the accessories enclosed to the
WLAN socket.

Switch the MP 3100 HV on, open the System Configuration menu by pressing
the

button on the remote control handset or the

button on the front
panel of the MP 3100 HV .

Use the

/

buttons on the remote control handset to select the
menu point “
Network
”, then confirm your choice with the

button.

The following menu now opens:
Possible entries
Searching for and Selecting
the Network

First select the menu point “
Scan for WLANS
”, and activate it by
pressing the

button.

A list of the WLANs found is displayed on the screen.

Use the

/

buttons to select the WLAN to which you
wish the MP 3100 HV to be connected, and confirm your choice with
the

button.
Entering the Password (for
encoded networks)
If the network is encoded, the window shown below will appear once the WLAN
is selected.

At this point please enter the network password and confirm your input
by pressing

.
Select the “
Store and exit?
” point, and confirm your choice with

.
Storing Network Settings
and Restarting Finally sel
ect the “
Store and exit?
” menu point and press the

button to
accept the settings.

If a WEP code is used, the password must be entered as a hexadecimal code
(0 - 9, A - F).