T+A MP 2000 R Mk II, Руководство пользователя

Страница: 17 / 74

17
Source names
menu item
At this menu item you can activate and disable external sources, and assign a
plain text name to each source; this name then appears in the screen displays.
When you call up this menu item using the

button, a list of all the
external sources of the MP 3100 HV appears. Each source is followed by the
assigned name, or if you have disabled the source concerned the note
'
disabled
'
.
If you want to activate / disable a source, or change the plain text name,
navigate to the appropriate line.
To activate a source, press the green

button; pressing the red

button disables the source.
To change the plain-text name, move to the appropriate line and press the

button. Now use the alpha-numeric keypad of the FD100 to change the
name as required, then confirm your choice with

; this saves the
settings for that source.
The

button is used to switch between numeric and alpha-numeric input,
and between capitals and lower-case letters.
Letters can be erased by pressing the

button.

If you should wish to restore the factory default source name, erase the whole
name before saving the empty field with the

button: this action resets the
display to the standard source names.


The only available method of entering the name is to use the alpha-
numeric keypad on the remote control handset.
Display Brightness
menu item
(screen brightness)

At this point you can adjust the brightness of the integral screen to suit your
personal preference for normal use.



We recommend that brightness settings 6 and 7 should only be used when the
screen is difficult to read due to very bright ambient light.
A lower brightness setting will extend the useful life of the screen.
Display Mode
menu item

This menu item offers the choice between three different display operation
modes:

Always on

Temporary

Always off
Selecting 'Temporary' will switch the display is on for a short while each time
the MP 3100 HV is being operated. Shortly after operation the display will be
switched off again automatically.


The brightness of the display can be adjusted separately with the menu item
'Display Brightness' (see above).
Language
menu item

In this menu item you define the language to be used for the displays on the
screen of the front panel of the
MP 3100 HV .
The language used for data transferred to the machine, e.g. from an Internet
radio station, is determined by the supplying device or the radio station; you
cannot define the language on the
MP 3100 HV .
Device name
menu item
This menu point can be used to assign an individual name to the MP 3100 HV .
In a home network the device then appears under this name.
If an amplifier is connected via the
H Link connection, then the amplifier is able
to accept this name automatically, and display it on the screen.

The amplifier only accepts this name if an individual name has not already
been assigned at the amplifier itself.