T+A MP 2000 R Mk II, Руководство пользователя

Страница: 52 / 74

52
Network Configuration
General Information The MP 3100 HV can be operated in wired LAN networks ( Ethernet LAN or
Powerline LAN ) or in wireless networks ( WLAN ).
If you wish to use your MP 3100 HV in your home network, you must first enter
the necessary network settings on the MP 3100 HV . This includes entering the
network parameters such as the IP address etc. both for wired and wireless
operation. If you wish to use a wireless connection, a number of additional
settings for the WLAN network also have to be entered.
Please refer to the Chapter 'Glossary / Additional Information' and 'Network
Terms' for additional explanations of terminology relating to network technology.

In the following sections we assume that a working home network (cable
network of WLAN network) with router and (DSL) Internet access is present.
If you are unclear about some aspect of installing, setting up and configuring
your network, please address your queries to your network administrator or a
network specialist.
Compatible hardware and
UPnP servers The marketplace offers a vast number of routers, NAS devices and USB hard
discs made by a very wide range of manufacturers.

equipment is generally
compatible with other makes of machine which bear the UPnP label.
Network settings menu All network settings are entered in the Network Configuration menu. This menu
will vary slightly in appearance depending on the type of your network, i.e.
whether you have a wired (LAN) or wireless (WLAN) network.
If in the Network Configuration Menu the entry 'Network IF Mode' is set to 'auto',
the
MP 3100 HV will check automatically if a LAN connection to a network is
present. If a LAN connection is found, the machine will assume that this is to be
used, and displays the network configuration menu for LAN networks.
If no LAN network is connected, the
MP 3100 HV activates its WLAN module
and displays the WLAN configuration menu when you call up the configuration
menu. The menu for a WLAN network includes a number of additional menu
points. The following sections explain how to use the menu, and the meaning of
the individual menu points.
Opening the network
settings menu Open the System Configuration menu by pressing the

button on the
remote control handset or the  button on the front panel of the MP 3100 HV .
Use the

/

buttons to select the “
Network
” menu item, then
confirm by pressing the

button.
Operating the nenu,
changing and storing
IP addresses Use the

/

buttons in the menu to select the network parameter to
be changed, and activate the entry with the

button.
You can now change the setting using the following buttons, depending on the
type of setting:

/

button for simple selection (ON / OFF)
Numeric buttons

to

for entering IP addresses
Alpha-numeric input for entering text
When the setting process is complete, or when you have entered the complete
address, press the

button to confirm your action.