T+A M 200, Руководство пользователя

Страница: 29 / 40

DAC 200
M 200
Right Loudspeaker Left Loudspeaker
*
**
* Use either the balanced XLR or the unbalanced RCA connection. If both types of connection are available (e.g. DAC
200), we always recommend the balanced connection.
** If the two M 200s are located further away from each other near the speakers, the E2-Link connection from the
DAC 200 to the M 200s can also be made directly to each of the two M 200s. So that the connection does not have to
be daisy-chained.
For this purpose, use the second E2 link socket at the DAC 200.
M 200
Connecting the mains cable
Connect the power cord to the M 200‘s AC power input, then connect the device to the power supply.
To achieve maximum possible interference rejection the mains plug should be connected to the mains
socket in such a way that phase is connected to the mains socket contact marked with a dot. The phase
of the mains socket can be determined using a special meter. If you are not sure about this, please ask
your specialist dealer.

Do not connect the M 200 and the other components to the mains until all necessary connections bet-
ween the devices have been established.
Wiring diagram
29