T+A K2 Blu, Руководство пользователя

Страница: 68 / 90

68
The Configuration for a WLAN connection
Setting the Parameters for a
Radio Network
•
Connect the WLAN aerial (supplied) to the K2 Blu WLAN aerial socket, and
ensure that no cable is attached to the K2 Blu LAN socket.
•
Switch the K2 Blu on, and select the Streaming Client function by pressing
the
   
/
   
button.
•
Now call up the Configuration menu as described above: with a long press on
the
   
button. You should now see the menu reproduced below, dis-
playing the network parameters.
Possible entries
Searching for and Selecting
the Network First select the menu point 'WLAN configuration start' , and activate it by
pressing the
   
button.
A menu appears showing these points:
•
Rescan - initiates new search for accessible radio networks
•
Set manually - adding a WLAN manually
After a brief delay the networks present in the vicinity are listed on the screen.
You can use the 'Rescan' function to start a new search for networks present in
the vicinity.
Please select one of the networks located, and activate it by pressing the
   
button.
Entering the Password
(for encoded networks)
If your network is encoded, the window illustrated above now appears. Please
enter the network password and confirm the entry by pressing

 

. Now
select the point ‘Save WLAN settings’ and confirm with
   
.
      
If a WEP code is used, the password must be entered as a hexadecimal code
(0 - 9, A - F).
Please enter the settings for the remaining network parameters as described
earlier in the section entitled
'Setting the Parameters for a Wired Network' .
Storing Network Settings
and Restarting Finally select the menu point 'Save and Restart', and press the
   
button;
this action accepts the settings, and restarts the K2 Blu with the new settings.