T+A K2 Blu, Руководство пользователя

Страница: 20 / 90

20
Menu point
Select alarm time
In this menu point you can select whether the machine is to be switched on
with an alarm, and - if so - with which alarm.
Menu point
Set alarm time
Manual setting of the alarm time for the currently active alarm. Initially the
change occurs slowly, but the rate of change increases if you hold the button
pressed in.
Menu point
Alarm source
Here you select the source which is to be switched on at the alarm time.
If you select the menu point Radio, you can select the radio station of your
choice from the Favourites list using the

 

/

 

buttons.
   
   
Alarm by radio:
Take care to set a station which can actually be received.
Alarm by disc:
When you activate the alarm function please ensure that a playable
CD is in the
disc mechanism.
Menu point
Alarm volume
At this point the alarm volume can be adjusted. If you change the volume, the
system immediately adopts the indicated volume value, and the alteration in
volume becomes audible.
Menu point
Alarm_Lsp.
(This menu point only appears if
loudspeakers are connected to
loudspeaker output B)
Here you select the loudspeaker group to be used for the alarm.
The available options are loudspeaker groups
A , B and A+B .
Menu point
Clock mode
In this menu point you can determine how the internal clocks is to be set.
RDS:
If you select the menu point RDS, you can select a radio station
from the Favourites list using the

 

/

 

buttons.
If you choose the ‘Any’ setting, the time of day will be read
automatically from the RDS signal provided by the currently set
station, and will be adopted by the machine; this occurs at night
and about three minutes after switching on.
If a station is selected, the time of day is automatically read out
from the RDS signal at night. If the selected station is the
current listening source, then the time of day is also taken from
the machine when it is switched on.
This only works if a good RDS signal can be received.
It is not possible to adjust the time of day manually!
Summer time: The time of day can be set manually in the menu point ‘Set
time of day’.
Winter time: The time of day can be set manually in the menu point ‘Set
time of day’.
Menu point
Set time of day
Manual adjustment of the internal clock to the correct time.
Initially the adjustment occurs slowly, but if you hold the button pressed in, the
rate of change increases.

 

 

Manual adjustment is only possible if you have already selected Summer or
Winter in the menu point ‘Clock Mode’.
Menu point
Brightness Clock
Here you can adjust the brightness of the integral screen in stand-by mode to
suit your personal preference; the revised brightness setting takes effect
immediately. The ‘off’ setting can only be selected if no alarm time is active.
      
In ECO stand-by mode it is possible to adjust the screen brightness, but the
screen is switched off again when you leave the menu.
(see chapter
'System settings (System configuration menu)' )