T+A Caruso, Руководство пользователя

Страница: 12 / 56

12
System Settings (System Configuration menu)
The System Configuration menu contains general device settings which are variable by the user. This menu is des-
cribed in detail in the following chapter.
Calling up and operating the
menu
•
To call up the menu press the     button briefly on the front panel or the
remote control handset.
•
When the menu is opened, the screen displays the following Select points:
...
Tone
Video
Speaker
Display brightness
Display contrast
Language
English Deutsch further languages
Adjustment facility
...
...
1
0
Configuration To Loudspeaker menu
3
30
Settings
Configuration To Tone Controls menu
To Video menu
•
Use the     /     buttons to select a point in the menu.
•
If you wish to change the selected menu point, first press the
   
button,
then use the     /     buttons to alter the value.
•
To accept the setting once you have changed the value, press the    
button again.
•
If you wish to quit
without
accepting any alteration, press the     button
at any time.
•
Press the     button again to leave the menu.
Menu point
Tone
Select this menu point to move to the Tone Controls menu.
Menu point
Loudspeakers
(Loudspeaker menu)
Activating this menu point calls up additional on-screen menu points which
relate to the loudspeakers.
Sub-point
Loudspeakers
Choosing the menu point External selects a 3.x configuration; in this
mode the

 
 should be set up as the Centre speaker.
Sub-point
Ext. Subwoofer
Selecting the menu point ‘Caruso’ in the Loudspeaker sub-point, and setting
the menu point ‘On’ in the Sub-woofer sub-point, switches off the integral bass
loudspeaker.
Sub-point
Crossover freq.
This menu point only appears if you select the menu point ‘On’ in the Sub-
woofer sub-point.
Sub-point
CM Active control
At this point you can switch the Trigger voltage for  
loudspeakers on and off.
If you set the trigger voltage option to
‘On’
, then   loudspeakers
connected to the PRE output of the

are switched on together with the

. This avoids the usual problem with automatic power-on systems: that of
“swallowing” the first few beats of the music.
If you connect different (active) loudspeakers or output stages to the unit, the
trigger voltage should be set to
‘Off’
.
Menu point
Video
This menu point is used to set up the output for the iPod.
If you select YUV, this must be supported by the iPod.
Menu point
Disply brightness
(Screen brightness)
Here you can adjust the brightness of the screen in normal use to suit your
personal preference. The available settings are:
•
1 to 3
Menu point
Display contrast
This menu point is used to adjust the screen’s contrast setting.
Screen contrast varies according to the viewing angle. Please set a value which
enables you to read the screen easily in your chosen conditions.
Menu point
Language
In this menu point you determine the language for the menus of the
   
.
The language used for transferred data, e.g. from an iPod or a UPnP-AV
server, is determined by the other machine, and
cannot
be set on the 
 
 .