T+A AMP 8, Руководство пользователя

Страница: 23 / 36

23
   

Caution!
Make sure that the terminals are firmly screwed down, and that
no short circuits are possible as a result of projecting cable ends
or errant wire strands.

 

   
Note:
If the loudspeakers are to be used in countries outside the EU the
red/black stoppers can be removed from the loudspeaker terminals.
The speakers can then be connected using banana plugs.
The stoppers are simply a push-fit in the terminals, and can be prised
out from the rear using a suitable tool such as a knife blade.
CTRL
(CONTROL)
This control-interface is used to control the AMP 8 via DAC 8 .
In combination with a third-party preamp the AMP 8 could be
controlled by a trigger-signal (please refer to page 34).
MAINS SWITCH / MAINS SOCKET
This socket is for mains connection.
For correct connection refer to the sections "
INSTALLATION AND
WIRING"
and "
SAFETY NOTES"
.

 

The mains switch disconnects the device not completely from
mains. To disconnect it completely from mains, the mains plug
must be withdrawn.
If you wish to switch the unit on, first move the mains switch to
the "1" position. If you know you will not be using the machine
for a long period, we recommend that you disconnect it from the
mains by withdrawing the mains plug from the wall socket.
If the machine is switched off using the mains switch the energy
consumption is 0 Watt.
Please see the chapter entitled "
Notes on Energy Saving" for details
of power consumption